|
|
Post by admin on Jan 19, 2008 13:11:46 GMT -8
April 5th Saturday Test & Tune April 18th Friday 7:30 PM April 19th Saturday 7:30 PM May 2nd Friday 7:30 PM May 16th Friday 7:30 PM May 30th Friday 7:30 PM June 13th Friday 7:30 PM June 27th Friday 7:30 PM July 3rd* Thursday 7:30 PM July 18th Saturday 7:30 PM August 1st Friday 7:30 PM August 15th Friday 7:30 PM August 29th Friday 7:30 PM September 12th Friday 7:30 PM www.winnemuccaregionalraceway.com/ |
|
|
|
Post by rules on Jan 27, 2008 12:01:10 GMT -8
Mini Modified, class rules 2008 Winemucca
please call or check website to confirm before racing.
A. Vehicle description
1. Must be a rear-wheel drive, factory produced, compact sedan, coupe, or light truck.
2. No mid-engine or rear-engine vehicle allowed.
3. Vehicle must weigh 1lb per CC, no lose weight of any type on
or in the vehicle.!!!!!!! ) And a max. Of 2600 cc ( 2.6 liter’s) engine size. Car must weigh 75lbs more if using aluminum heads.
B. Body & Frame
1. Body must be steel or can be aluminum.
2. Plastic or fiberglass nose section allowed.
3.Tube frames must use stock front & rear stubs and must be steel. (Frame connectors).
4. Frame or sub-frames (stubs) must match suspension used.
5. Pickup bodies must have a tonneau cover over bed area.
6. Doors may be gutted and welds, straps, bolts, or rivets must secure them.
7. Weight- jacks are allowed.
8. Any type shock absorbers, including coil-over, may be used.
9. Differential must be semi-floating type, and quick-change type rears are not allowed.
10. Spindles must be O.E.M.
11. A mandatory protective screen must cover the full windshield opening, securely fastened, to top and bottom, with vertical support centered, max. ½” sq. openings
12. Spoilers may be no higher then 8" from mounting point, no wings.
13. Must have at least three working brakes.
14. No open front wheels.
C. Engine
1. In-line, single-camshaft, 4-cylinder engines only.
2. Engine displacement must not exceed 2,600 cubic centimeters.
3. No purpose-built race engines, such as Cosworth, Indy, etc.
4. Using, Esslinger-Ford Motorsports aluminum head, M-6049-E23A. Car must add 75 lbs. But this rule, as all others, will be monitored during the season and are subject to change, if deemed appropriate by the WSCD rules Committee.
5.Engine and transmission brand must match (e.g. Toyota engine with Toyota transmission; Ford engine with Ford transmission).
6. Engine setbacks allowed, but front spark plug must be not more than 3 inches behind spindle centerline.
7. Single-disc, stock- appearing clutch only; no Ram couplers, etc. allowed.
8. No aluminum flywheels unless factory “stock”.
9. No titanium allowed anywhere in the valve train.
10. Connecting rods must be ferrous.
11. One, 2-barrel, downdraft carburetor only. Must flow less than 501 cfm.
12. No magneto or crank-trigger ignitions.
13. No dry-sump oiling systems.
14. No roller camshafts or rocker's.
15. Only 2 valves per cylinder.
D. Tires and Wheels
1. Tires must be DOT radials or DOT re-treads.
2. No racing or other re-treads are allowed.
3. Tread wear rating must be visible on outside of tire, and must be greater than 100; durometer reading must be greater than 56.
4. Tread width measured across the top of the tire cannot exceed 8½ inches.
5. Grooving and sipping of tires is permitted.
6. Unacceptable tires include, but are not limited to, Dirt Bozz, A008, R-1, and others.
7. Any reinforced stock steel wheel or racing-type steel wheel may be used.
8. Wheel spacers must have a thickness not to exceed 1-inch.
9. Bead-locks are allowed, on right rear wheel only
|
|
|
|
Post by scrappy on Apr 22, 2008 13:58:23 GMT -8
does lovelock run pure stock/gen-x cars? If so, is it regularly, or just once in awhile? heard it's a cool track, would love to go there. thanks.
|
|
|
|
Post by minimod2 on Apr 22, 2008 14:35:22 GMT -8
|
|
|
|
Post by scrappy on Apr 22, 2008 16:53:07 GMT -8
I'm sorry minimod2, I meant winnimucca. I was on board to get a membership and make lovelock my hometrack, untill I realized they were only going to give us 4/5 races. I had heard winnimucca had a cool track, and was wondering about them, and if they ran gen-x. thanks for the reply.
|
|
|
|
Post by minimod2 on Apr 23, 2008 4:07:59 GMT -8
Winnemucca normally doesn't have enough gex-x cars to race, so if any show up, they normally throw them in with us Pro4s. If they had enough cars show up though, I am sure they would let you run as a class of your own. You would need to show up with at least 6 cars.
|
|
|
|
Post by 440scout on May 15, 2008 10:09:52 GMT -8
HOW MANY GENXRS HAVE THERE BEEN AT THE LAST FEW RACES.. I RAN LAST YEAR BUT ENDED UP WITH THE MODMINIS.. BEING THAT UNDER POWERD SUCKS, BUT I DID GET THIRD...
|
|
toynv
Full Member
Posts: 125
|
Post by toynv on May 15, 2008 10:59:04 GMT -8
hey doug, i raced that junker up in quincy. lead the main for a while in it too till a car spun in fron of me and i bent my fron end all up. ended up 6th i think with two flat tires. you would do good up there. trying to get enough money to get my normal car up to winnemucca. maybe not this week. it sucks being poor!
|
|
