|
Post by ethan18 on Apr 20, 2010 18:45:14 GMT -8
hello i bought the old 86 white celica i am having troubles with my clutch when i push in the clutch and put it in gear and let the clutch out it doesnt do anything for about 20 seconds then it engages any advice?
|
|
millerlt3
Junior Member
LETS DO THE WILD THANG !!
Posts: 87
|
Post by millerlt3 on Apr 20, 2010 20:00:51 GMT -8
check the clutch cable to see if its bound up
|
|
|
Post by ethan18 on Apr 21, 2010 6:03:57 GMT -8
The hydralic cable?
|
|
|
Post by will26 on Apr 21, 2010 7:29:01 GMT -8
Slave cylinder is sticking,Are you running a spring between the clutch fork and the slave cylinder? When the clutch does engage does it slip when you get on the gas?
|
|
|
Post by ethan18 on Apr 21, 2010 14:35:45 GMT -8
no its good to go when it engages
|
|
millerlt3
Junior Member
LETS DO THE WILD THANG !!
Posts: 87
|
Post by millerlt3 on Apr 21, 2010 16:09:50 GMT -8
sorry didnt know it was hydraulic good luck to ya!!!!!!!!
|
|
|
Post by patterson64 on Apr 21, 2010 20:20:15 GMT -8
i have had this happen to me a few times too...it could be a few things....first check for any cut or crimped lines if you dont find any crimped or cut lines then make sure to bleed the slave cylinder and if after all that it still isnt fixed you just need to replace the slave cylinder and make sure to bleed the new one...if you have any questions you can give me a call at 530-228-9312
|
|
|
Post by one on Apr 22, 2010 17:01:02 GMT -8
your slave cylinder is sticking. napa sells them or go to the junk yard and pull one off of a car. we would like to see pics of that car now post some pics
|
|
|
Post by genz17 on May 5, 2010 10:28:48 GMT -8
We got the clutch fixed. Can't keep the brakes bled on it. I don't see it leaking anywhere. It just doesn't seem to hold pressure. It still has the stock vacum assist master cylinder on it.
|
|